Silent Canopy 80kw Lovol Industrial Diesel Power Generator

• Customization: Available
• Type: Self-Starting Diesel Generator
• Installation Method: Fixed
• Model NO.: BS-L100
• Stroke: Four Stroke
• Cooling Method: Water Cooling
• Output Type: AC Three Phase
• Speed: Speed
• Conditions of Use: Land Use
• Usage: Common Units, Standby Unit, Emergency Crew
• Landuse Type of Unit: Low Noise
• Excitation Mode: AC Rotating Exciter
• Engine: Lovol
• Alternator: Stanford
• Controller: Smartgen, Deepsea...
• Starting Method: Electric Start
• Power: 22kw - 163kw
• ATS: Optional
• Color: as Per Request
• Frequency: 50Hz/60Hz
• Voltage: 400V 380V
• Transport Package: Packed in Plywood Cases or Wooden Cases or Foam, E
• Specification: As for power
• Trademark: BOSSPOWER
• Origin: China
• HS Code: 85021200
• Production Capacity: 100 Sets / Month

Product Description

PRODUCT DESCRIPTION

 

Engine Parameter:
Manufacturer/Model:               Aspiration:                              Fuel System:          Cylinder numbers Displacement: Bore x Stroke Compression Ratio: Max. Power: Governing System:	LOVOL 1006TG2A, 4 stroke Turbocharged, Air/air cooling PN Fuel Pump, 6 cylinders in-line 5.9 L 105 x 127 mm 17.5 : 1 102KW / 139HP Electrical
Exhaust System
Exhaust Gas Flow: Exhaust temperature: Max. Allowed Back Pressure:	17.9 m³/min  535 ºC   10 KPa
Intake System
Max. Allowed Pressure: Gas Volume: Air Flow:	6.2 kPa 7.8 m³/min 298 m³/min
Fuel System
100% Load (Prime): 75% Load(Prime): 50% Load (Prime):	24L/h 18L/h 12L/h
Lube System
Oil Capacity: Oil Consumption: Bottom shell oil capacity: Oil Pressure at rated speed:	16.4 L ≤4g/kw.h 14.3 L 350 kPa
Cooling system
Coolant Capacity: Thermostat: Max. Water Temperature:	26 L 82-93ºC 104ºC

  

Alternator Parameter:        Basic Information
The alternators meet the standards of: GB755, BS5000, VDE00530, NEMAMG1-22,IED34-1,CSA22.2 and AS1350
Technical Data:
Manufacturer: Phases: Connection: Bearing numbers: Power Factor: Protection Class: Altitude Condition: Excitation: Insulation class/Temp. rise class: Tel. Influence Factor TIF: Tel. Harmonic Factor THF: Steady State Voltage Regulation: Alternator Capacity: Efficiency: Cooling Air Flow:	STANFORD, UCI274C  3   3 phase 4 wire, Y type   1  0.8  IP23  ≤1000M  Brushless, self-excitation   H / H   <50  <2%  ≤±1%  100KVA  90.4%  0.37 m³/s

Genset Technical Data:

Voltage Setting Range: Steady State Voltage Regulation: Transient Voltage Deviation: --100% sudden power cut: --Sudden power on Voltage Stabilization Time: --100% sudden power cut: --Sudden power on Steady State Frequency Regulation: Frequency Fluctuation Rate: Transient Frequency Deviation: --100% sudden power cut: --Sudden power on Frequency Recovery Time: --100% sudden power cut: --Sudden power on

≥±5% ≤±1% ≤+25% ≤-20% ≤ 6 s ≤ 6 s ≤5% ≤0.5% ≤+12% ≤-10% ≤ 5 s ≤ 5 s

The data just for reference.
 

PRODUCT SHOWS

 

PRODUCT ADVANTAGE

 
(1)The silent canopy we use cold-rolled sheet, all positions are stronger.
 
(2)Our spraying plastics all go through pre-treatment of pickling and phosphating, so that the surface of the
    
    painting will not change color even if placed outside for five years.
 
(3)Canopy color painted by customer's requirement.
 
(4)Strict test including 50% load,75% load,100% load and 110% Load .
 
(5)Forklift mouth in base frame for easy loading and discharging.
 
(6)Logo made by customer's requirement if order quantity ≥10units or a full container.

FAQ

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, the rest payment before shipment.  Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.But if your order with some special design, then the
    delivery time is longer.
Q: What certificates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria,
     CIQ for Egypt, SASO for Saudi Arabia, etc
Q:What is your MOQ?
A: Above 1pc
Q. Which port do you often use when export?
A: Fuzhou Port, or as customer request.
Q.How to choose the power?
A.:Collect all power of your equipments,take the current into your consideration.
Q.What is the difference between Prime power and Standby power?
A.:Prime power is 12hours continous power,one hour 10% over load in every 12 running hours is allowed.
Standby power is the limit value of maximum output for emergency use. Overloading is prohibited
Q.What about the warranty
Guarantee for one year or 1000 hours (accord to whichever reach first) from ex-factory date.During the guarantee period,
our company will provide the free easy damaged spare part for problems caused by our quality of production or raw material
except the damageable spare parts of diesel engine caused by customer's incorrect man made operation.After expiration,
our company provides cost parts maintenance for gen-set.
 

CONTACT US